CONDENSATE DRAIN

Sanpar make internal drain is a no air loss drain. sanpar make internal drain is float type drain with standard 1/2" bsp connections. there is no-air loss drain.

An AUTOMATIC TIMER CONTROLLED DRAIN consists of a strainer with a solenoid valve (230v A/C). The drain valve opens based on the timings set in the drain. Also the time interval between the successive openings of the valve can be set. The drain has standard 1’’ BSP connections.

This Mechanical Float Drain is highly-effective and requires no Electrical Supply for its operation. Also ensuring Zero precious Compressed Air Loss

Salient feature SANPAR make NO AIR LOSS CONDENSATE DRAIN

• Drain casted in an Aluminum Alloy Body
• It contains a stainless steel float ball
• It discharge only the condensate automatically (not the compressed air)
• It is also equipped with a manual drain valve for manual operation
• Standard 1’’ BSP connection
• Easy maintenance

SANPAR Level Control Drain

Zero Air Loss

½” BSP/ 1” BSP

The SANPAR Level Sensor Drain which ensures there is no loss of compressed air while the condensed moisture/water is drained off the Dryer/Filter/Air Receiver. The solenoid valve closes while the condensed water level reaches the bottom sensor and valve opens while the level reaches the top sensor. There is always a small amount of water that remain in housing, preventing the compressed air draining it along with water. Drain housing are equipped with all of the features required to make this the most efficient and cost effective draining solutions for compressed air system. The drain comes with an aluminium die cast housing that can withstand a maximum working pressure of 16 bar(g).